Time for some updates! After thinking a lot about how I should get started on the laser cutter project I have made some progress. In this post I will write about the framing for te cutter and where to get the pieces. The original project at buildlog.net specifies Misumi extrusions. …
This is the first post about my new big project. A laser cutter. While the project is running I will try to write updates and post the files generated by the project in the laser cutter category. First, Why? It’s too easy to answer with a ‘why not’ so let me …
So my friend has this stair… This is the beginning of my explanation every time I tell people about this project. Well… My friend has this stair which is made of glass blocks that protrude from the wall. is it amazingly cool to look at and quite creepy to look through …
While finishing my work on the Roskilde boombox project with the MAX9768 chip I discovered that there is a sister-chip called MAX9744. While the 9768 is a 10W mono amplifier the 9744 is a 20W stereo chip! so 4 times the power in a single chip, while the same controls …
As promised in the previous post here is some newer revisions of the amplifier board. I have removed the guitar preamp and obviously the switch to control it as well. This makes the board a whole lot smaller so the overall footprint is now: 42.4mm * 22.5mm I also have …